Nema 24 (60mm) hollow ncej stepper motors
> > Cov lus piav qhia luv luv
| Hom Tsav | Bipolar stepper |
| Kauj ruam | 1.8° Nws |
| Qhov hluav taws xob (V) | 2.1 / 2.9 |
| Tam sim no (A) | 5 |
| Kuj (Ohms) | 0.42 / 0.57 hli |
| Inductance (mH) kev | 1.3 / 1.98 Nws |
| Cov Hlau Hlau | 4 |
| Tuav Torque (Nm) | 1.5 / 2.5 hli |
| Tsav Length (mm) | 55 / 75 ib |
| Ambient Kub | -20 ℃ ~ + 50 ℃ |
| Kub nce | 80k Max. |
| Dielectric zog | 1 mA Max.@ 500V, 1KHz, 1Sec. |
| Rwb thaiv tsev Resistance | 100MΩ Min.@500 Vdc |
> > ntawv pov thawj
>> Hluav taws xob Parameters
| Lub cev muaj zog | Lub zog / Theem (V) | Tam sim no / Theem (A) | Kev tiv thaiv / Theem (Ω) | Inductance / Theem (mH) | Tus naj npawb ntawm Cov Hlau Hlau | Rotor Inertia (g.cm2) | Tuav Torque (Nm) | Lub cev muaj zog L (mm) |
| 60 | 2.1 | 5 | 0.42 ib | 1.3 | 4 | 340 | 1.5 | 55 |
| 60 | 2.9 | 5 | 0.57 ib | 1.98 ib | 4 | 590 ua | 2.5 | 75 |
> > General technical parameters
| Radial clearance | 0.02 hli Max (450g load) | Rwb thaiv tsev tsis kam | 100MΩ @ 500VDC |
| Axial clearance | 0.08 hli Max (450g load) | Dielectric zog | 500VAC, 1mA, 1s @ 1KHZ |
| Max radial load | 70N (20mm ntawm flange nto) | Rwb thaiv tsev chav kawm | Chav Kawm B (80K) |
| Max axial load | 15 N | Ambient kub | -20 ℃ ~ + 50 ℃ |
>> 60HK2XX-5-4B lub cev muaj zog daim duab kos
> > Torque-frequency nkhaus
Kev kuaj mob:
Chopper tsav, tsis muaj ramping, ib nrab micro-stepping, tsav voltage 40V
Sau koj cov lus ntawm no thiab xa tuaj rau peb
